10 Best Pool Vacuum For Intex Above Ground Pool We've Tested: Top Rated

What is the best way to vacuum an above ground pool?

To vacuum an above-ground pool, follow these steps:

1. Prepare the Vacuum: Attach the vacuum head to the telescopic pole and connect the vacuum hose to the vacuum head. Ensure that the hose is securely attached to prevent any loss of suction.

2. Prime the Vacuum: Submerge the vacuum head and hose into the pool, allowing water to fill the hose completely. This will remove any air pockets and ensure efficient suction.

3. Connect the Hose to the Skimmer: Take the other end of the vacuum hose and connect it to the skimmer inlet or dedicated vacuum port. If using the skimmer inlet, remove the skimmer basket and insert the hose into the opening. If your pool has a dedicated vacuum port, simply connect the hose to the port.

4. Start the Filtration System: Turn on the pool's filtration system to create suction for the vacuum. This will draw water and debris from the pool through the vacuum hose.

5. Vacuum the Pool: Begin vacuuming the pool by slowly moving the vacuum head across the pool surface, overlapping your strokes for thorough cleaning. Take care not to disconnect the hose or stir up debris, which could cloud the water.

6. Clean or Backwash the Filter: As you vacuum, debris will be collected in the pool's filter system. Monitor the pressure gauge on your filter and clean or backwash the filter as necessary to maintain optimal performance.

7. Empty and Rinse the Vacuum: Once you have finished vacuuming, turn off the filtration system and disconnect the vacuum hose from the skimmer or vacuum port. Remove the vacuum head and empty any collected debris. Rinse the vacuum head and hose with clean water to remove any remaining debris.

By following these steps, you can effectively vacuum your above-ground pool and keep it clean and clear of debris. Remember to regularly clean or backwash your pool's filter system to maintain efficient filtration.

How do you use an Intex pool vacuum above ground pool?

To use an Intex pool vacuum for an above-ground pool, follow these steps:

1. Prepare the Vacuum: Assemble the vacuum according to the manufacturer's instructions. The Intex pool vacuum typically consists of a vacuum head, telescopic pole, and vacuum hose.

2. Attach the Vacuum Head: Connect the vacuum head to the telescopic pole. Make sure it is securely fastened.

3. Connect the Vacuum Hose: Attach one end of the vacuum hose to the vacuum head. The other end will either connect directly to the suction port on the pool wall or to the included skimmer adapter plate.

• If using the skimmer adapter plate: Place the skimmer adapter plate over the skimmer basket inside the pool. Insert the other end of the vacuum hose into the adapter plate.

• If connecting directly to the suction port: Remove the strainer basket from the suction port on the pool wall. Insert the end of the vacuum hose into the suction port.

4. Prime the Vacuum: Submerge the vacuum head and hose into the pool, ensuring that they are fully filled with water. This removes any air from the hose and ensures proper suction.

5. Turn on the Pump: Start the pool's filtration system to activate the vacuum. This will create suction that pulls debris from the pool.

6. Vacuum the Pool: Holding the telescopic pole, slowly move the vacuum head across the pool's surfaces, including the bottom and sides. Overlap your strokes for thorough cleaning. Take care not to disconnect the hose or disturb debris, as this may cloud the water.

7. Cleaning and Maintenance: Monitor the pool's filter system, and clean or backwash it as needed to maintain proper filtration. Empty and rinse the vacuum head and hose after use to remove any collected debris.

It's important to consult the specific instructions provided with your Intex pool vacuum for any additional or model-specific steps. By following these general guidelines, you can effectively use an Intex pool vacuum to clean your above-ground pool.

How do I get algae off the bottom of my Intex pool?

To remove algae from the bottom of your Intex pool, you can follow these steps:

1. Brush the Pool: Start by using a pool brush to vigorously scrub the bottom of the pool. This will help loosen the algae and make it easier to remove.

2. Test and Adjust Water Chemistry: Test the water chemistry of your pool using a reliable pool testing kit. Adjust the pH and chlorine levels to the recommended ranges for killing and preventing algae growth. Maintaining proper water chemistry is crucial in preventing algae from returning.

3. Shock the Pool: Add a pool shock treatment according to the manufacturer's instructions. This will provide a high dose of chlorine to kill the algae. Make sure to choose a shock treatment suitable for your pool type and size.

4. Allow for Circulation and Filtration: Run the pool's filtration system continuously to circulate the water and help remove the dead algae particles. Keep the pump and filter clean to ensure optimal efficiency.

5. Use Algaecide (if necessary): If the algae problem persists or if you're dealing with a severe case, you can use a pool algaecide. Follow the instructions on the product label to apply the algaecide properly. Be sure to choose an algaecide compatible with your pool type.

6. Vacuum the Pool: After the shock treatment and filtration have had time to work, vacuum the pool to remove the dead algae from the bottom. Use a pool vacuum or an automatic pool cleaner designed for your Intex pool. Ensure the vacuum head and hose are clean and properly connected.

7. Backwash or Clean the Filter: If your pool has a sand or D.E. filter, backwash it to remove the debris and algae collected during the process. If you have a cartridge filter, clean or replace the filter cartridge as needed.

8. Repeat if Necessary: Depending on the severity of the algae problem, you may need to repeat the process multiple times until the pool is completely clear of algae.

Remember, prevention is key to avoiding algae growth in the future. Regularly test and balance the water chemistry, maintain proper circulation and filtration, and keep the pool clean to prevent algae from returning.

Read More:

10 Best Above Ground Pool Installers in 2023: Reviews With FAQs

10 Best Above Ground Pool Ideas in 2023 Review & Buyers Guide