10 Best Lawn Mower Lift Jack in 2024 Review & Buyer's Guide

To safely jack up a riding lawn mower, follow these steps:

1. Park on a Level Surface: Choose a flat and level surface to park your riding lawn mower.

2. Engage Parking Brake: Ensure the parking brake is engaged to prevent the mower from rolling.

3. Turn Off Engine: Turn off the engine and remove the ignition key to avoid accidental startup.

4. Position Jack: Place a hydraulic jack or automotive jack under the frame of the mower deck or another sturdy part of the chassis. Avoid placing the jack under the mower deck itself, as it may not support the weight safely.

5. Lift Carefully: Slowly pump the jack handle to raise the mower until the wheels are off the ground. Make sure the jack is stable and securely positioned before proceeding.

6. Use Jack Stands: Once the mower is lifted to the desired height, place jack stands under the frame for added support and safety.

7. Perform Maintenance: With the mower safely lifted, you can now access the underside for maintenance tasks such as blade sharpening or deck cleaning.

8. Lower Mower: After completing the maintenance, carefully lower the mower by releasing the jack slowly and removing the jack stands.

How to make a lawn mower lift?

You can make a simple lawn mower lift using commonly available materials. Here's a basic DIY method:

1. Materials Needed:

   • Two sturdy wooden planks or ramps
   • Bricks or concrete blocks (optional)
   • Hydraulic jack or automotive jack
   • Jack stands

2. Construct Ramps: Place the wooden planks or ramps on either side of the mower, ensuring they are stable and securely positioned.

3. Drive Onto Ramps: Carefully drive the riding lawn mower onto the ramps, positioning it centrally between them.

4. Use Jack and Stands: Once the mower is on the ramps, use a hydraulic jack to lift the front or rear of the mower, depending on the maintenance task. Place jack stands under the frame for added stability and safety.

5. Perform Maintenance: With the mower lifted, you can now access the underside for blade sharpening, cleaning, or other maintenance tasks.

6. Lower Mower: After completing the maintenance, carefully lower the mower by releasing the jack slowly and removing the jack stands.

What is a lift mower?

A lift mower, also known as a riding mower lift or lawn mower lift, is a specialized tool designed to elevate riding lawn mowers for maintenance and repair tasks. It typically consists of a sturdy metal frame with hydraulic or mechanical lifting mechanisms, allowing users to raise the mower safely and easily. Lift mowers come in various sizes and weight capacities to accommodate different types of riding mowers. They provide a convenient and stable platform for accessing the underside of the mower deck for blade sharpening, cleaning, or other maintenance activities.

How to lift a riding lawn mower to change blades?

To lift a riding lawn mower safely to change blades, follow these steps:

1. Prepare Mower: Park the mower on a flat and level surface, engage the parking brake, and turn off the engine.

2. Position Jack: Place a hydraulic jack or automotive jack under the front or rear axle of the mower, depending on the location of the blades you need to change. Ensure the jack is positioned securely and on a stable surface.

3. Lift Mower: Carefully pump the jack handle to raise the front or rear of the mower, lifting it high enough to access the underside of the mower deck.

4. Use Jack Stands: Once the mower is lifted to the desired height, place jack stands under the frame for added support and safety.

5. Access Blades: With the mower safely lifted, you can now access the blades by reaching underneath the mower deck. Use caution and wear gloves when handling sharp blades.

6. Change Blades: Remove the retaining bolts or nuts securing the blades to the spindle shafts, then replace the blades with new ones, ensuring they are installed correctly and tightened securely.

7. Lower Mower: After changing the blades, carefully lower the mower by releasing the jack slowly and removing the jack stands.

8. Test Mower: Before operating the mower, ensure the blades are properly installed and secure. Start the engine and engage the blades briefly to verify they are functioning correctly.