The 10 Best Above Ground Pool Cover Pump Review For 2024

What is the best way to pump water off a pool cover?

The best way to pump water off a pool cover is by using a submersible pool cover pump. Here's a step-by-step guide on how to pump water off a pool cover:

1. Ensure Safety: Before starting any maintenance task, prioritize safety. Make sure the power to the pump and any electrical connections near the pool are turned off.

2. Locate the Drainage Area: Identify a suitable area where you can drain the water from the pool cover. This area should be sloped away from the pool to prevent water from flowing back into the pool.

3. Position the Pump: Place the submersible pool cover pump in the center of the pool cover, ensuring it is fully submerged in the water. Follow the manufacturer's instructions for the proper installation and positioning of the pump.

4. Connect the Hose: Attach a suitable drainage hose to the pump's outlet. Ensure the hose is long enough to reach your desired drainage area without any kinks or restrictions.

5. Power on the Pump: Turn on the power to the pump and let it start pumping the water. Most submersible pumps have automatic switches that activate when the water reaches a certain level.

6. Monitor the Process: Keep an eye on the pump to ensure it is effectively removing water from the pool cover. Periodically check the drainage area to make sure the water is flowing away from the pool.

7. Empty the Collection Container: Some pumps have a collection container that may need to be emptied when it fills up. Follow the manufacturer's instructions on how to empty the container safely.

8. Regular Maintenance: After pumping the water off the pool cover, rinse and clean the pump according to the manufacturer's recommendations. Store the pump properly to maintain its longevity.

Remember to always exercise caution when working with electrical devices near water and follow the specific instructions provided by the manufacturer for your pool cover pump model.

What is the best pump to use on an above ground pool?

When it comes to selecting the best pump for an above ground pool, there are a few factors to consider, such as pool size, filtration needs, energy efficiency, and overall performance. Here are two common types of pumps used for above ground pools:

1. Single-Speed Pump: Single-speed pumps operate at a fixed speed, typically at a high RPM. They are reliable and cost-effective but less energy-efficient compared to variable-speed pumps. Single-speed pumps are suitable for smaller above ground pools with basic filtration needs.

2. Variable-Speed Pump: Variable-speed pumps allow you to adjust the pump's speed to meet your pool's specific requirements. They offer multiple speed settings, allowing you to run the pump at a lower speed for regular filtration and a higher speed for tasks like pool cleaning or water features. Variable-speed pumps are more energy-efficient and can result in significant energy savings over time, although they tend to have a higher upfront cost.

When choosing a specific pump model, consider reputable brands known for quality and reliability. It's also important to ensure that the pump's flow rate and horsepower are compatible with your pool's size and filtration system requirements. It's recommended to consult with a pool professional or retailer who can provide guidance based on your pool's specific needs.

Additionally, look for pumps with features like a strainer basket for easy debris removal, durable construction, and a user-friendly interface. Consider energy-efficient models that are ENERGY STAR certified, as they can help reduce energy consumption and save on operating costs in the long run.

What happens if you don't pump water off the pool cover?

If you don't pump water off the pool cover and allow it to accumulate, several issues can arise:

1. Excessive Weight: As water accumulates on the pool cover, it adds significant weight. This extra weight can put stress on the cover and potentially cause it to sag or even tear, leading to damage and costly repairs.

2. Cover Damage: The weight of the water can stretch and damage the pool cover material over time. This can result in tears, holes, or weakening of the cover's integrity, reducing its effectiveness in protecting the pool.

3. Debris Buildup: Standing water on the pool cover can act as a breeding ground for mosquitoes and other pests. Additionally, leaves, dirt, and other debris can accumulate in the water, making it more difficult to clean the pool when you eventually remove the cover.

4. Water Contamination: The stagnant water on the pool cover can become dirty and contaminated. When you remove the cover, this contaminated water can potentially spill into the pool, affecting its water quality.

5. Structural Damage: If the water on the pool cover becomes excessively heavy, it may seep through the cover and onto the pool's surface. This can cause damage to the pool structure, such as cracking or shifting of the pool walls or floor.

To prevent these issues, it's important to regularly pump water off the pool cover, especially after heavy rainfall or during periods of excessive water accumulation. Using a submersible pool cover pump, as mentioned earlier, is an effective way to remove the water and maintain the integrity of both the pool cover and the pool itself.

How do I get water off my pool cover without draining the pool?

If you want to remove water from your pool cover without draining the entire pool, here are a few methods you can try:

1. Using a Submersible Pool Cover Pump: A submersible pool cover pump is specifically designed to remove water from pool covers. Place the pump on top of the cover, ensuring it is fully submerged in the water, and connect a hose to the pump's outlet to direct the water away from the pool. The pump will automatically start pumping water out of the cover.

2. Siphoning: If you don't have access to a pool cover pump, you can create a siphon to remove the water. Start by connecting a garden hose to a water source. Submerge one end of the hose in the water on the pool cover, keeping it completely filled with water. Then, cap the end of the hose with your hand, quickly move it to a lower point than the pool cover, and release your hand to allow the water to flow out. Gravity will create a siphon effect, and the water will continue to flow out of the hose until the pool cover water level is lower than the pool's surface.

3. Using a Wet/Dry Vacuum: If you have a wet/dry vacuum with a water extraction feature, you can use it to remove water from the pool cover. Attach the appropriate hose or attachment to the vacuum and use it to suction the water from the cover.

Remember, these methods are specifically for removing water from the pool cover and not for draining the entire pool. Be cautious not to remove too much water or put excessive strain on the pool cover. Regularly monitor the water level on the cover and remove it as needed to prevent damage or excess weight.

Read More:

Best Above Ground Pool Heaters Gas Reviews & Buyers Guide in 2023

10 Best Gauge For Above Ground Pool Liner - Best Deals in 2023